Distributors of Quality Electrical Products at Lowest Prices

Opti-mystTM flame and smoke effect, Multiple worldwide patents pending, Fully variable flame and smoke intensity control, Silent operation, 180 degree flame and smoke viewing angle, Dichroic Xenon bulbs with extended life, 2 litre easy refill water tank, Optiglo® glowing logs with shimmering ash bed, 1 and 2kW heat selection from concealed fan heater, Opti-mystTM effect can be used independently of heat, Thermostat, Remote control, Contemporary-style stove design, Fan heater, Choice of heat setting, Flame/Fuel Effect

Power consumption effect - 262 Watts

Dimensions: Height: 707mm  Width: 606mm Total Depth: 399mm

Style – Inset

Power consumption effect - 212 Watts

Dimensions: Height: 657mm  Width: 590mm  Total depth: 310mm  Depth of inset: 160mm

Wall mounted TFT display unit in landscape format, Compact flash card with choice of audio visual playback of 8 different continuous-loop moving scenes

-the four seasons

-a roaring log fire

-a cosy coal fire

-a dying embers log fire

-a soothing aquarium

In-built speakers, Fully functional remote control giving scene selection, volume control and heat on/off operation, Finished in black with contrasting chrome effect trim, Heated glass enhances realism of fire scenes, 19" for LVA191, WXGA 16:9 aspect ratio TFT display in landscape format, 1GB compact flash card with video footage, 8 ohm speaker set, Remote handset and manual control, Adjustable sound level, Wall mounting only, 1.2kW fan heater

Dimensions: Height: 440mm  Width: 690mm  Total Depth: 70mm

Delivery at least 5 Days. Free mainland UK. Ireland £20.00+vat

• For use either wall-mounted or recessed so that only the frame protrudes
• Finished in Matt Black
• Concealed fan heater gives output of two heat settings to 2kw
• Remote control for on/off, heat and flame effect light levels
• Optiflame® Optiglow glowing log effect log effect can be used independant of heat 
• Dimensions H525mm W1200mm  D182mm
• Opening for recessed installation H520mm x W1143mm x D145mm

• For use either wall mounted or recessed so that only the frame protrudes. 
• Remote control of on/off, heat output and flame effect light levels
• Silent heating operation
• Optiflame® log effect
• Satin silver effect finish
• Unique “smart” heated glass
• Radiant and convected heat output of 500 Watts 
• Dimensions H650mm W1200mm  D182mm
• Opening for recessed installation H640mm x W1143mm x D146mm

• A sleek, contemporary flame effect fire designed for wall mounting.
• Remote control giving armchair selection of on/off, heat output and flame effect light levels.
• Choice of Optiflame® Elite log and Optiflame® white pebbles (both supplied).
• Finished in black.
• Fully concealed 2kW fan heater with remote control and manual switching.
• Choice of 1kW and 2kW heat settings.
• Flame effect can be used independently of heat source.
• Wall mounted only (cannot be recessed).
• Power consumption effect only 140 Watts.
•  Dimensions H605mm x W700mm x D154mm

• Open fronted contemporary fire with concealed 2kW fan heater.
• Flame effect can be used independantly of heat.
• 2kW fan heater with electronic thermostat.
• For use wall-mounted or inset.
• Remote control.
• Optiflame® effect with Optiglo® glowing log bed and white pebbles (both supplied).
• Black finish.
• Dimensions: Height: 620mm  Width: 700mm  Total Depth: 153mm
• Opening requirements for recessed installation H600mm x W410mm x D110mm

• Open fronted contemporary fire with concealed 2kW fan heater
• Flame effect can be used independently of heat
• Fan heater with choice of 1kW and 2kW heat settings
• For use wall-mounted or inset
• Thermostat
• Choice of Optiflame® Elite log effect and Optiflame® white pebbles (both supplied)
• Black glass front 
• Dimensions H620mm W700mm D152mm
• Opening requirements for recessed installation H600mm x W400mm x D145mm

• Glass fronted contemporary fire with concealed 2kW fan heater.
• Flame effect can be used independantly of heat.
• Fan heater with choice of 1kW and 2kW heat settings.
• For use wall-mounted or inset.
• Thermostat.
• Unique Optiflame® log effect.
• Dark grey frame with black front.
• Remote control
• Dark grey frame with black front
• Dimensions: Height: 600mm.  Width:696mm.  Total Depth:183mm
• Opening requirements for recessed installation H580mm x W580mm x D130mm

• Contemporary fire designed for use either wall-mounted or recessed
• 2kW fan heater with a choice of 1kW and 2kW heat settings
• Finished in silver grey with a reversible frame finished in gloss black and gloss white
• Remote control
• Thermostat
• Optiflame® log effect 
• Dimensions H621mm W750mm D183mm 
• Opening requirements for recessed installation H580mm x W580mm x D130mm

• The Valencia  is in a chrome effect finish and is an inset fire.
•  The Valencia can be controlled remotely and there’s a choice of 2 heat settings.
• The flame effect works independently of the heat source of 1.5kw. 
•  Dimensions: H665mm x W700mm x D218mm
• Opening requirements for recessed installation H632mm x W648mm x D185mm

• The Navarra fire is in a satin silver effect finish. 
• The Navarra can be controlled remotely with a choice of 2 heat settings.
• Fan heater fully concealed of Wattage 1.5kw.
• The flame effect works independently of the heat source.
• Inset fire.
• Dimensions: H550mm x W600mm x D220
• Opening requirements for recessed installation H532mm x W550mm x D210mm
   

• A stylish canopy free fire finished in black or silver.

• Canopy free fire - no protrusion from fan heater.
• 1.5kW inset fire with unique Optiflame® Plus effect.
• Electronic thermostatic control giving highly accurate room temperature control.
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Fits flat-to-wall with 70mm spacer (included).
• Black finish.
• Manual or remote control giving armchair selection of on/off.
• Coal and small white pebbles supplied as standard.
• Power consumption effect only 130 Watts
• Approximate dimensions 582mm(H), 519mm(W), 198mm(D)

• Stainless steel effect with chrome effect details
• 2kW fan heater with choice of heat settings
• Thermostat
• Flame effect can be used independently of heat
• Inset depth of just 55mm fully inset or can be used flat-to-wall using spacer provided
• Optiflame® effect with coal and white pebbles 
• Dimensions H617mm W520mm D162mm

• Stainless steel effect with chrome effect details ad polished cast fret
• 2kW fan heater with choice of heat settings
• Thermostat
• Flame effect can be used independently of heat
• Inset depth of just 55mm fully inset or can be used flat-to-wall using spacer provided
• Optiflame® effect with coal and white pebbles 
• Dimensions H617mm W520mm D180mm

• Inset fire with unique Optiflame® effect
• Stainless steel with brass effect trim
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Choice of 1kW or 2kW fan heat settings
• Chassis allows the fire to be fully inset where flue allows with minimal projection into room. 55mm needed
• Can be flat wall fixed using supplied spacer   
• Comes with both pebbles and coal
• Dimensions: H617mm x W520mm x D162mm

• Inset fire with unique Optiflame® effect that fits standard 16" and 18" openings. Controls located beneath the canopy. 
• Choice of 1kW or 2kW fan heat settings
• Supplied with both pebbles and coals
• Can be fully recessed. 55mm with spacer provided.
• Brushed stainless steel finish
• Can be flat wall fixed using two optional spacers DX17   
• Dimensions: H617mm x W514mm x D162mm

• Inset Fire with unique Optiflame® effect with real coals
• Brushed Stainless Steel finish
• Choice of 1kW and 2kW fan heat settings
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Chassis allows the fire to be fully inset where flue allows with minimal projection into room. 
• Supplied with both pebbles and coal
• Inset depth of only 55mm or flat wall fixed using spacer provided   
• Dimensions: H617mm x W514mm x D162mm

•  Freestanding and fits flat to wall
• Real coals and white pebbles supplied.
• Chrome and satin silver effect.
• 2kW fan heater with choice of 2 heat settings.
• Power consumption effect only 130 Watts.
• Approximate dimensions H665mm, W603mm, D226mm. 

• A freestanding fire with black and chrome effect finish.

• Unique Optiflame® effect.
• Freestanding and fits flat to wall.
• Real coals and white pebbles supplied.
• Black and chrome effect finish.
• 2kW fan heater with choice of 2 heat settings.
• Power consumption effect only 130 Watts.
• Approximate dimensions H665mm, W603mm, D226mm.

• Brushed Stainless Steel
• Inset or Free-standing fire with Optiflame® effect
• Will fit 16" and 18" fireplace openings if free-standing spacer is removed
• Choice of 1kW or 2kW fan heat settings
• Comes with choice of pebbles or coal
• Dimensions: H617mm x W514mm x D162mm

• Canopy free fire - no protrusion from the fan heater.

• Remote control giving armchair selection of on/off.
• 1.5kW inset or freestanding fire with unique Optiflame® Plus effect.
• Electronic thermostat control giving highly accurate room temperature control.
• Designed to fit 16" and 18" fireplaces and all conventional flues.
• Fits flat-to-wall with 70mm spacer (included).
• Flame effect can be used independently of heat source.
• Brass effect.
• Power consumption effect only 130 Watts.
• Dimensions: H617mm x W514mm x D162mm 

• Inset fire with unique Optiflame® effect
• One piece solid cast metal grate and front
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Choice of 1kW or 2kW fan heat settings
• Chassis allows the fire to be fully inset where flue allows with minimal projection into room.
• Supplied with both pebbles and coal as standard
• Can be flat wall fixed using 55mm spacer provided 
• Dimensions: H635mm x W516mm x D185mm