Distributors of Quality Electrical Products at Lowest Prices

Fans - window, wall and ceiling, with timers or humidifiers. Trunking and grills.

AirVent Products. Axial flow fans utilise a propeller type blade to move the air in line with the axis of the motor. They are very efficient at moving large volumes of air through walls or windows into free air. Centrifugal fans incorporate drum type blades and move the air at 90 degrees to the axis of the motor. They do not achieve the same air volumes as axial fans but generate much higher pressures which make them ideal for ducted installations. 30 Litres per sec=108m3/per hour

FAN 4 inch STANDARD+TIMER

F25

The timer allows the fan to work normally when the room light is switched on, providing a programmable "delay to off" function when the light is switched off. Standard 4" fan in shock and heat proof ABS plastic material. 2800 Rpm induction motor Class B with self-lubricating bushes and thermal protection. Fit for continuous running in an environment with temperature not higher than 50C. Can be installed on windows by using a kit (NS207). Splash proof to IPx4. Extractor capacity 93m3/hr (26l per second) max. Maximum room temparature 40d C. 153mm x 153mm x 35mm front flange.

FAN 4 inch STANDARD

F24

Larger picture

100mm Axial extract fan suitable for panel mounting or wall/window mounting using the appropriate accessory kit. All non pull-cord variants can be ceiling mounted. High quality ABS mouldings. With external gloss finish. Quiet Operation

Meets the requirements of Building Regulation Document F. IP44 rated, BEAB Approved, and CE marked in accordance with all the relevant EEC harmonised directives, double insulated, class II Motor fitted with thermal protection.

Rated Voltage 220-240v-50Hz. Rated Wattage 16w

Dimensions Height – 154mm Width - 154mm Depth - 47mm

Hole Diameters: Window 105mm. Wall 115mm

Airflow: Panel Mount 883m/hr Window/Wall 543m/hr

FAN 4 inch STANDARD+TIMER AIRVENT

F25A

Axial extract fan with backdraught shutter and electronic overrun timer adjustable from 3 minute to 25 minutes, the factory setting is 15 minutes. Suitable for panel mounting or wall/window mounting using the appropriate accessory kit. Option: Direct switching override at low humidities.

Wall or ceiling mounting. All non pull-cord variants can be ceiling mounted. High quality ABS mouldings. With external gloss finish. Quiet Operation.

Meets the requirements of Building Regulation Document F. IP44 rated, BEAB Approved, and CE marked in accordance with all the relevant EEC harmonised directives. Double Insulated, class II Motor fitted with thermal protection

Rated Voltage 220-240v-50Hz. Rated Wattage 16w. Dimensions Height – 154mm Width - 154mm Depth - 47mm

Hole Diameters Window 105mm Wall 115mm. Airflow: Panel Mount 883m/hr Window/Wall 543m/hr

FAN 4 inch - Metal Effect

F16

Larger picture

Chrome or Brass effect. Standard 4" fan in shock and heat proof ABS plastic material. 2800 Rpm induction motor Class B with self-lubricating bushes and thermal protection. Fit for continuous running in an environment with temperature not higher than 50C. Can be installed on windows by using a kit (NS207)

Timer version: The timer allows the fan to work normally when the room light is switched on, providing a programmable "delay to off" function when the light is switched off.

FAN 4 inch Low Profile Fan. Mains Voltage

F18

Larger picture

Slim axial extract fan with backdraught shutter and electronic timer adjustable from 3 minutes to 25 minutes, the factory setting is 15 minutes. Suitable for panel mounting or wall mounting using the appropriate accessory kit. Slim – only 15mm thick. Wall or ceiling mounting. High quality ABS Mouldings. External Gloss Finish. Quiet operation

Meets the installed performance requirements of Building Regulations Document F. IP44 rated, GS approved and CE marked in accordance with all the relevant EEC harmonised directives. Double insulated, class II motor fitted with Thermal Protection.

Hole Diameter: Ø115mm. Airflow: 90m3/h. Sound : 37.3dBA @ 3m

Rated Voltage 220-240V 50Hz. Rated Power: 16W

Height 159mm. Width 159mm. Depth 15mm

FAN 4 inch. Low Voltage

F20

Larger picture

Slim axial extract fan. SELV 12V AC. Suitable for panel mounting or wall mounting by using the appropriate accessory kit.

SELV (Safety Extra Low Voltage). Wall or ceiling mounting. Optional adjustable overrun timer.

High quality ABS mouldings. With external gloss finish. Quiet Operation

Meets the installed performance requirements of Building Regulations Document F for a wall fan. IPX7 rated fan suitable for installing in zone 1. GS approved and CE marked in accordance with all the relevant EEC harmonised directives. Fan class III, motor fitted with Thermal Protection. Controller class II.

Hole Diameter: Ø115mm. Airflow: 90m3/h. Sound : 37.3dBA @ 3m

FAN 4 inch Timer Low Profile. Low Voltage with Timer

F19

Larger picture

Slim axial extract fan and electronic overrun timer adjustable from 1 minute to 30 minutes, the factory setting is 15 minutes. SELV 12V AC. Suitable for panel mounting or wall mounting by using the appropriate accessory kit.

SELV (Safety Extra Low Voltage). Slim – only 15mm thick. Wall or ceiling mounting. Adjustable overrun timer

High quality ABS mouldings. With external gloss finish. Quiet Operation

Hole Diameter: Ø115mm. Airflow: 90m3/h. Sound : 37.3dBA @ 3m

4 inch IN-LINE EXTRACTION FAN inc TIMER. MAINS

F38

100mm In-line axial shower fan kit with electronic overrun timer adjustable from 5 to 30 minutes. Factory setting is 15 minutes. Includes fan, detachable mounting foot, 3m aluminium flexible ducting, white and brown grilles. Quiet operation. Backdraught shutter

Meets the installed performance requirements of building regulations document F for an inline fan. IP44 rated, GS approved and CE marked in accordance with all the relevant EEC harmonised directives. Double insulated, class II motor fitted with Thermal Protection.

Hole diameters: 115mm. Airflow: 82m3 /h installed 108m3 /h fan only, free air 78.6m3/per hour. 22 Litres per sec

Rated Voltage 220-240V 50Hz. Rated Power: 14W

SHOWER FAN & LIGHT KIT WITH TIMER. LV

NS366

Larger picture

4 inch axial shower extractor fan with run-on timer plus in-built low voltage light, 3m of flexi-ducting, 12v transformer, IPX4 splashguard, 2 bezels (white and chrome), outside grille with fly guard, cable ties, fixings and instruction leaflet . Everything you need except the connection to the mains. May be installed in shower cubicles, or above baths or washbasins. Provides light as well as ventilation. (Max. 35W 12v standard dichroic - 35W lamp supplied).

Technical Data

* Extract performance: 70m3/hr (at 0pa pressure)

* Wattage: 12-20W

* Max Temp: 50°C

* Max pressure: 16pa

Standard 4 inch In-Line Duct Fan

F01

Operating distance 3 metre. Ideal for shower/bathrooms and WC's. Extracts moisture to prevent mould growth.

FAN 6 inch STANDARD

F30

Larger picture

Standard 6 inch fan in shock and heat proof ABS plastic material. 2800 Rpm induction motor Class B with self-lubricating bushes and thermal protection. Fit for continuous running in an environment with temperature not higher than 50C. Can be installed on windows by using a kit (NS212). For wall or ceiling. 250M3/h extraction.

Axial extract fan with backdraught shutter provided with direct switching via a pull-cord. Suitable for panel mounting or wall/window mounting using the appropriate accessory kit. Suitable for panel, wall or window mounting. High Quality ABS moulding with external gloss finish. Quiet Operation. Reversible grommet for surface of flush mounting.

Meets the requirements of Building Regulation Document F. IP22 rated, BEAB Approved. CE marked in Accordance with all the relevant EEC harmonised directives. Double Insulated, class II Motor fitted with thermal protection.

Dimensions: Height – 225mm. Width - 218mm. Depth - 119mm

Rated Voltage 220-240v-50Hz. Rated Wattage 30w

Hole Dimensions Window 160mm Wall 170mm

Airflow: Panel mount 245m3/hr

Window/Wall 220m3/hr