FAN 4 inch Low Profile Fan. Mains Voltage

F18
F18fan
Larger picture

Slim axial extract fan with backdraught shutter and electronic timer adjustable from 3 minutes to 25 minutes, the factory setting is 15 minutes.  Suitable for panel mounting or wall mounting using the appropriate accessory kit.  Slim – only 15mm thick.  Wall or ceiling mounting.  High quality ABS Mouldings. External Gloss Finish. Quiet operation

 

Meets the installed performance requirements of Building Regulations Document F. IP44 rated, GS approved and CE marked in accordance with all the relevant EEC harmonised directives. Double insulated, class II motor fitted with Thermal Protection.

               

Hole Diameter: Ø115mm. Airflow: 90m3/h.  Sound : 37.3dBA @ 3m

Rated Voltage 220-240V 50Hz.  Rated Power: 16W

 Height 159mm.  Width 159mm.  Depth 15mm        

FAN 4 inch Timer Low Profile. Low Voltage with Timer

F19
F19fan
Larger picture

Slim axial extract fan with backdraught shutter and electronic overrun timer adjustable from 1 minute to 30 minutes, the factory setting is 15 minutes.  SELV 12V AC. Suitable for panel mounting or wall mounting by using the appropriate accessory kit.          

 

SELV (Safety Extra Low Voltage). Slim – only 15mm thick. Wall or ceiling mounting. Adjustable overrun timer

High quality ABS mouldings. With external gloss finish. Quiet Operation

                                                                               

Meets the installed performance requirements of Building Regulations Document F for a wall fan.  IPX7 rated fan suitable for installing in zone 1. GS approved and CE marked in accordance with all the relevant EEC harmonised directives.  Fan class III, motor fitted with Thermal Protection. Controller class II.

               

Hole Diameter: Ø115mm. Airflow: 90m3/h. Sound : 37.3dBA @ 3m

FAN 6 inch STANDARD

F30
F30fan
Larger picture

Standard 6 inch fan in shock and heat proof ABS plastic material. 2800 Rpm induction motor Class B with self-lubricating bushes and thermal protection. Fit for continuous running in an environment with temperature not higher than 50C. Can be installed on windows by using a kit (NS212). For wall or ceiling. 250M3/h extraction.

Axial extract fan with backdraught shutter provided with direct switching via a pull-cord.  Suitable for panel mounting or wall/window mounting using the appropriate accessory kit. Suitable for panel, wall or window mounting. High Quality ABS moulding with external gloss finish. Quiet Operation. Reversible grommet for surface of flush mounting.

Meets the requirements of Building Regulation Document F. IP22 rated, BEAB Approved.  CE marked in Accordance with all the relevant EEC harmonised directives. Double Insulated, class II Motor fitted with thermal protection.

 

Dimensions: Height – 225mm. Width  - 218mm. Depth  - 119mm

Rated Voltage 220-240v-50Hz. Rated Wattage 30w

Hole Dimensions   Window 160mm   Wall        170mm               

Airflow: Panel mount   245m3/hr

             Window/Wall  220m3/hr   

FAN 6 inch STANDARD+TIMER

F32
F30fan
Larger picture

Axial extract fan with backdraught shutter provided with direct switching via a pull-cord.  Suitable for panel mounting or wall/window mounting using the appropriate accessory kit. Suitable for panel, wall or window mounting. High Quality ABS moulding with external gloss finish. Quiet Operation

Reversible grommet for surface of flush mounting.

 

Meets the requirements of Building Regulation Document F. IP22 rated, BEAB Approved.  CE marked in Accordance with all the relevant EEC harmonised directives. Double Insulated, class II Motor fitted with thermal protection.

 

Dimensions.   Height – 225mm.  Width  - 218mm. Depth  - 119mm

Rated Voltage 220-240v-50Hz. Rated Wattage 30w

Hole Dimensions: Window 160mm.  Wall   170mm               

Airflow: Panel mount   245m3/hr    Window/Wall  220m3/hr   

Fan Window Fitting Kit

NS207
NS207fan
Larger picture

For F18, F19, F24, F25A, F30 or F32

Fan Wall Fixing Kit

NS212
NS212fan
Larger picture
For F18, F19, F24, F25A, F30 or F32

FAN GRILL with GRAVITY FLAPS

F28
F28fan
Larger picture

Wall outlet with gravity flaps - round spigot

FAN GRILL FIXED LOUVRED GRILL

F27
F27fan
Larger picture

Louvred grill with flyscreen - round spigot

FAN COWLED GRILL

F40
F40
Cowled wall outlet - round spigot. With damper 

4 or 6 inch x 3 METRES FLEXIBLE HOSE

F03
F03

Round flexible PVC hose

4 or 6 inch x 6 METRES FLEXIBLE HOSE

F06
F03

Round flexible PVC hose

4 inch x 15 METRES FLEXIBLE HOSE

F10
F03

Round flexible PVC hose

FAN HOSE CONNECTOR

F23
F23
Connector for two flexible hoses

FAN HOSE CLIP

F35
F35
 

LOGO

Xpelair Ventilation Solutions

The efficient and stylish Premier range of pressure developing fans is designed specifically for domestic applications, including bathrooms, shower rooms toilets and utility rooms where longer duct runs are required. They are also suitable for commercial applications such as hotel rooms, office toilets, commercial bathrooms, and for coastal installations.

All models have a gloss white casing with clean and sleek appearance. A two part casing means Premier fans can easily be recessed or surface mounted. They can be fitted into ceilings or studwork walls in recesses as little as 50mm deep using the side entry knockout provided, an FDA adaptor and Profile 29 flat duct. Alternatively 100mm circular ducting can be used. All feature an automatic air operated back draught shutter and the CF20 range are supplied with a brown 100mm external outlet grille for wall or soffit fixing.

The clip off front cover and removable fan blade on all models allow easy cleaning and maintenance. All also have a neon indicator (except DX180/T).

F53 models are IPX5 rated whereas the F50,F51,F52 models are IPX4. All are BEAB approved. They are all suitable for 220-240Vac 50Hz mains operation. Motors are totally enclosed and maintenance free for life, with self aligning bearings and a thermal cut-out. All electronics and wiring terminals are fully protected.


Hole size: 117mm (wall) 120mm (window)

DX180 Premier Single Speed Centrifugal Unit

F50
F50
Larger picture

Operated by remote switch. Extract performance 94m3/h. Sound pressure level 49db. 4 inch

DX180T Premier Single Speed Centrifugal Unit With Timer

F51
F51
Larger picture

Built in fixed 20 minutes run on period after the light has been switched off. Extract performance 94m3/h. Sound pressure level 49db. 4 inch

DX180H Premier Single Speed Centrifugal Unit With Humidistat

F52
F52
Larger picture

On/off humidistat adjustable 50-90% RH. Extract performance 94m3/h. Sound pressure level 49db. 4 inch

DX200T High Performance Centrifugal Unit With Timer

F53
F53
Larger picture

Room size selector matches extract performance for improved efficiency

‘Quickvisit’ delay feature prevents fan from running should light be switched on/off again within 2 minutes.

Mechanical trickle ventilation facility

Three speed and trickle settings

Built – in run on period after light is switched off.  User adjustable from 30s to 20mins.

Extract performance 108m3/h. Sound pressure level 50db.

4 inch

6inch Single Speed Inline Showerfan System with Timer

F54
F54
Larger picture

Step out of the shower cubicle. Is the mirror steamed up? There is another way. Remove the cause of condensation at source with an Xpelair inline shower fan system.

With a neat grille installed directly over the shower, humid or moist air will be ducted away by a fan above the ceiling and onwards to a grille installed outside, typically in the soffit.  Will I be standing in a draught? No, air will not be pulled into a normal cubicle, only flow over it.

The systems contain all the components necessary for a normal installation, comprising:

  • inline fan
  • 3m of flexible duct
  • Four worm drive clips
  • Internal ceiling grille with sleek styling in white
  • Outside soffit/wall grille
  • capacity 133m3/h

All electronics circuits and wiring terminals are fully protected. Motors are Class B lubricated for life, fitted with safety thermal overload protection and suitable for ambient temperatures up to 40ºC.

Xpelair XIL systems conform to Building Regulations mechanical ventilation for toilets shower rooms and bathrooms.

 

Built-in overrun timer adjustable at installation from 3-15mins.

Operated by a remote switch (in a bathroom, wired to the lighting circuit)

Can also be wired to a water flow switch, fitted in the pipework to the shower control, to switch on/off when shower is in use.

Hole Diameter: 165mm 

DX400 Two speed centrifugal fan

F55
F55
Larger picture

Kitchen ventilation has never looked so good. The DX400 pressure developing centrifugal fans are sleekly styled and are ideally suited for use in kitchens, utility rooms and larger bathrooms and toilets and individual offices.

They can be surface or flush mounted in walls and ceilings using the universal mounting accessories provided, and include a back draught shutter and outlet grille. Both models have their inlet discreetly concealed behind a stylish white front cover. This cover is held in position by clips for easy removal for cleaning.

All models are IPX5 rated and BEAB approved. They are all suitable for 220-240V 50Hz mains operation and feature external rotor motors with integral balanced impellers, sealed for life maintenance free bearings and safety thermal cut out protection.

Pre-select speed to suit application

Alternatively use optional COS switch to change between speeds and on/off

Includes external wall grille.

Extract performance 245m3/h. 4 inch fan. Sound pressure 55db

9/12 inch High Performance Intake/Extract Axial Ventilation Unit

F58
F58
Larger picture

Commercial grade:

Choice of optional controllers.

Suitable for single and sealed double glazing windows and panels up to 25mm.

Balanced external rotor motor and impeller for quiet efficiency.

Sealed for life maintenance free bearings, suitable for running at any angle.

Built-in silent action electro-thermal shutter cassette.

Passive trickle vent facility for background ventilation with fan off.

Easy clean high gloss ABS housing with integral finger safety guard.

Shadow grey external grille for unobtrusive external appearance.

Tamperproof internal connection safety plug and socket.

Unique metal ladder strip/screw connection to external grille for security and weather tight seal.

Extact capacity 728m3h (9 inch).  1614m3h (12 inch).  Sound pressure 55db

Group Fan Controller

F56
F56
Larger picture

For use with F58

On/off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow.  For use with up to four fans (not mixed sizes).

Inline Fan Controller

F57
F57
Larger picture

Slide switch provides fan on/off control.

Adjustable speed control for infinitely variable speeds.  Complete with power ‘on’ indicator light.

For Xpelair XIDP plastic inline centrifugal fans


"Distributors of Quality Electrical Products at Lowest Prices"