Water Storage Heater - Unvented Undersink

22422

• 2.0kW element for rapid heat up
• external temperature control
• neon element-on indicator
• glass lined vessel with magnesium anode
• manually re-settable thermal cut-out
• wall mounting or floor standing option
• pressure relief valve included
• 10L suitable for 1 to 2 sinks, 15L suitable for 2 to 3 sinks depending on simultaneous usage
• mains pressure (unvented) unit - maximum working pressure 6 bar
• maximum working temperature 75 degrees centigrade

    The supplied pressure relief valve must be fitted in every case. Depending on the details of the installation, additional accessories may be needed to comply with the Water Regulations. If your nearest cold water draw off is close to the heater, you will need to fit a check valve and expansion vessel (SF3). If your mains water pressure is above 4.2 bar, you will need to fit a pressure reducing valve (SF4) 

    Water Storage Heater Unvented Undersink
    !
     <<